This section applies to SSAI (server-side ad insertion) in the live streaming services only.
Los anuncios son delimitados en el stream por los puntos de referencia definidos anteriormente en este documento. Sin embargo, puede que algunas semánticas no queden claras con esa definición simple, de modo que explicaremos esas semánticas un poco más en profundidad aquí.
The reliability of the cue points (e.g., presence, contents, and timing of the cue points) described below are ultimately determined by the quality of the information received from the station's RAS. Por ejemplos, algunos RAS solo marcan el comienzo y el final de cada período de corte comercial, y no de los anuncios individuales. Los reproductores deberían tolerar esta situación, o ser desarrollados teniendo en cuenta la peculiaridad de una estación. Las estaciones que realizan reemplazo desde el servidor tenderán a seguir estas reglas de manera más estricta.
Comienzo del anuncio/corte comercial
Los anuncios individuales, y los períodos completos de cortes comerciales (es decir, una serie de anuncios contiguos), son activados por el mismo punto de referencia. Cuando el reproductor recibe dicho punto de referencia, debería considerar el stream como "en corte comercial" y ajustar su comportamiento acorde a ello (por ej.: mostrar/revelar banners, eliminar la información del artísta/título, etc.).
El comportamiento es idéntico para todos los formatos de puntos de referencia, pero los nombres y atributos de los puntos de referencia variarán según el formato:
STWCue | AndoXML | ShoutCast V2 |
|---|---|---|
Y
|
Y
|
Y
|
Los anuncios contiguos serán todos marcados individualmente por uno de estos puntos de referencia. El reproductor es considerado "en corte comercial" hasta que recibe uno de los puntos de referencia de "término de corte comercial" descritos a continuación.
Término de corte comercial
Los términos de los períodos de los cortes comerciales son marcados o explícitamente, por un marcador "end break", o implícitamente, por recepción de un punto de referencia que no está específicamente identificado como un anuncio. De nuevo, el comportamiento es idéntico para todos los formatos de puntos de referencia, pero los nombres y atributos de los puntos de referencia variarán según el formato.
STWCue | AndoXML | ShoutCast V2 |
|---|---|---|
O
|
O
|
O
O
|
Cuando el reproductor recibe uno de estos puntos de referencia, debería considerar el stream como "fuera del corte comercial", y tomar las medidas necesarias (por ej.: eliminar/ocultar banners, restaurar título de pista/artísta/portada, liberar recursos innecesarios, etc.).
Break-end Grace Period and Reset
With Triton Digital's new TAP advertising platform, industry separation and frequency capping for live streams is handled differently than it was previously. One of the differences is how the system determines when the stream is in a break, and when that break is over.
In some cases the pattern of cue points sent by your RAS might cause the ad server to think a break has finished when in fact it has not, result in the same (or similar) ads playing in close succession. Also, very brief content segments between breaks can cause the separation and capping system to return the same or similar ads as were played just before the brief content segment.
The Break-end grace period is the time that must elapse after the endbreak cue point before the break is considered to be truly ended. If another ad cue point arrives before the grace period has elapsed, the system assumes the same break is still active. The Default Break-end grace period (which applies to all of your stations) is one second* which in most cases is sufficient. However, if you hear the same or similar ads playing during a break, or after a brief content segment between breaks, then it indicates that the system thinks the break is over before it actually is. If so, you can usually fix the problem by overriding the station's Break-end Grace Period with a longer period.
* While the Default Break-end Grace Period is set at one second, you can request a custom Default Break-end Grace Period setting (such as "30 seconds"). See below.
Custom Default Break-end Grace Period
You can request a custom Default Break-end Grace Period setting (such as "30 seconds") by contacting Customer Support and asking for a global change to the default Break-end grace period. Be aware that this changes the default for all of your stations. However, you can still go to the Station Configuration in the Triton Console and override that custom default setting on a station-by-station basis. Therefore:
To create a custom Default Break-end Grace Period for all stations: Contact Customer Support.
To override the Default Break-end Grace Period for a specific station: use the station configuration section of the Triton Console.
For information on overriding the Default Break-end Grace Period, see the Triton Digital Streaming Console User Guide topic, Edit Station Configuration.
Break-end Grace Period Example Scenarios
